Checklist for a property buyer’s final inspection

31-July-2013 Family Law,Property By admin

If you have ever purchased a property, you would have faced that nervous day three days prior to settlement, where you were invited to inspect the property. But what is it that you looked for when you did your inspection? And did you have any regrets days or weeks later, realising that you could have resolved a problem you are facing with the property if you’d been more thorough in that final inspection?

Under the provisions of the standard contract for the sale of property, the purchaser is entitled to make one inspection of the property in the three days before the time appointed for completion. The vendor has an obligation to leave the property in the same condition it was in at the time contracts were exchanged, subject to fair wear and tear.

The purpose of the final inspection is:

1.    To ensure that all of the inclusions listed in the contract remain.

2.    To verify that the exclusions listed in the contract have been removed.

3.    To check that appliances, equipment, fittings and services are in working order.

4.    To ensure there has been no significant damage to the property since the exchange of contracts.

5.    To verify that the property is vacant.

6.    To ensure that no rubbish, building materials, refuse etc. is left in the house or on the property.

It is preferable for the final inspection to take place:  


  • after the vendor has moved out;
  • as close to the settlement time as is practicable, but
  • allowing sufficient time to resolve any problems.

Mr Ron Moss, Principal Solicitor at Streeterlaw, said the vendor does not have a legal obligation to leave the property in a spotless condition but it must be in a condition that is similar to the time when the contracts were exchanged. 

 

“The effectiveness of a final inspection will largely depend upon the thoroughness of the purchaser’s due diligence investigation prior to contracts being exchanged,” Mr Moss said. “Evidence may be required as to the condition of the property at the time of exchange. Such evidence can be obtained from inspection reports, photographs taken, statements made by or on behalf of the vendor stating that appliances and equipment are in full working order.” 

 

He said any problems discovered at the final inspection should be brought to the attention of the vendor as soon as possible. Most issues can be resolved by the parties negotiating and acting reasonably, failing which the purchaser’s options include:

  • Delaying settlement until the problem has been rectified
  • Making a claim for a reduction in the purchase price
  • Agreeing to settle the matter with money being retained to rectify the problem within a specified time, or
  • In extreme cases, rescinding or terminating the contract

Mr Moss added: “Clearly, it is far preferable to make an arrangement to rectify the issue prior to settlement when the vendor may be more amenable to doing so because of pressure to finalise the matter. It is invariably more difficult and costly to make a claim once settlement has taken place.”


For more information or to discuss your property issue, please contact one of Streeterlaw’s experts on 8197 0105 or send an email to advice@streeterlaw.com.au

Found this article useful? Feel free to share it!
Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInEmail this to someone